|
»ç¾ç / Á¦Ç°¹øÈ£
|
PGM-1100
|
| Sensor |
Sensor
|
Range
|
Resolution
|
| Oxygen |
|
|
| Carbon Monoxide |
|
|
| Carbon Monoxide |
|
|
| Hydrogen Sulfide |
|
|
| Sulfur Dioxide |
|
|
| Nitric Oxide |
|
|
| Nitrogen Dioxide |
|
|
| Chlorine |
|
|
| Chlorine Dioxide |
|
|
| Hydrogen Cyanide |
|
|
| Ammonia |
|
|
| Phosphine |
|
|
| Battery |
User replaceable 2/3AA high capacitance Lithium
battery |
| Operating Hours |
Typical battery life is 2 years or 730 minutes of alarm for CO and
H2S sensors, one year typical or 360 minutes of alarm for all other
sensors |
| Attachment |
Wrist strap, SS alligator clip (installed), SS
belt clip/hard hat adapter |
| Display |
Easy to read LCD for continuous display of concentration in ppm
and text messages |
| Key Pads |
1 button operation |
| Direct Readout |
Instantaneous values as parts per million in air |
| Peak hold |
| STEL & TWA values and alarm minutes consumed |
| Alarm |
Audible: 90 dB at 10 cm |
| Visual: Bright Red/Green LED bar visible form top,
front and sides |
| Sensory: Built in vibration alarm |
| High: Displays "High" emits 3 beeps and flashes
every 3 seconds |
| Low: Displays "Low" 2 beeps and flashes every 3
seconds |
| STEL: Displays "STEL" 1 beep and flash every 3
seconds |
| TWA: Displays "TWA" 1 beep and flash every 3
seconds |
| Low battery displays empty battery symbol, 1 beep
per minute |
| Calibration |
Two point field calibration; Auto-zero at startup, user initiated
span/ standard reference gas |
| Temperature |
-4 to 114°F for O2, CO & H2S, for other
sensors see Tech Note 114 |
| Humidity |
0 to 95% relative humidity (non-condensing) |
|
Intrinsic Safety
|
UL & cUL Class I, Division I, Group A, B, C,
D, T6, II 1G, EEx ia IIB T6, II 2G, EEx ia IIC T6, CE |
| EMI/RFI |
Highly resistant to EMI/RFI, compliant with EMC Directive
89/336/EEC |
IP Rating
|
IP-65; protected against dust, protected against
low pressure jets of water from all directions |
| Size |
3.6" L x 1.9" W x 0.9" H |
| Weight |
3.6 ounces |